 |
Index for
Section 5 |
|
 |
Alphabetical
listing for D |
|
 |
Bottom of
page |
|
dtenvvar(5)
CDE
NAME
dtenvvar - CDE environment variables
DESCRIPTION
The CDE desktop sets up and uses a number of environment variables to find
certain files and do certain things. Components tied into CDE then use
these environment variables to locate specific types of files. Environment
variables used within the CDE desktop are:
CEPATH Used by ToolTalk when in Classing Engine mode, where the
Classing Engine where to find the databases. Refer to
ttsession(1) and tt_type_comp(1) for more information.
COLUMNS Set by the terminal emulator. Refer to dtterm(1) for more
information.
DISPLAY Is set to the associated display name. Refer to dtlogin(1)
and ttsession(1) for more information.
DTAPPSEARCHPATH
Used to search for Application Manager applications. Refer
to dtappgather(1) and dtsearchpath(1) for more information.
DTDATABASESEARCHPATH
Used to collect filetype and action definitions, as
expressed in *.dt files. Refer to dtsearchpath(1),
dtaction(1), dtactionfile(4), and dtdtsfile(4) for more
information.
DTHELPSEARCHPATH
System specified variable used to locate desktop help files.
Refer to dtsearchpath(1) and dthelpgen(1) for more
information.
DTHELPUSERSEARCHPATH
User specified variable used to locate desktop help files.
Refer to dtsearchpath(1) and dthelpgen(1) for more
information.
DTMOUNTPOINT Used to set the name of the file system's mount point, such
as '/nfs' or '/net'. Refer to dtspcd(1m) and
dtsearchpath(1) for more information.
DTPRINTCWD If set to an existing, usable directory, this setting causes
dtlp(1) to execute the lp command pipeline from that
directory. By default, this setting uses the current
directory from which dtlp(1) is invoked. Refer to dtlp(1)
for more information.
DTPRINTFILEREMOVE
Remove the file after printing it. This functionality is
intended for temporary files generated by components such as
the Text Editor and Help system files that don't need to
persist beyond the act of printing. Value must be True or
False (case is ignored). Default is False. Refer to
dtlp(1) for more information.
DTPRINTSILENT Print the file silently, without posting the PRINT dialog.
Value must be True or False (case is ignored). Default is
False. Refer to dtlp(1) for more information.
DTPRINTUSERFILENAME
Use this value as the name of file as it should appear in
the PRINT dialog. Default is print_file. Refer to dtlp(1)
for more information.
DTSCREENSAVERLIST
Used to set the default desktop screen saver action list.
Used by dtstyle(1) to determine the list of available screen
savers. Refer to dtstyle(1) for more information.
DTSPSYSAPPHOSTS
Used by system administrators as an input to dtsearchpath(1)
to create the DTAPPSEARCHPATH environment variable. It is
the primary environment variable and drives the remaining
search paths for filetypes and actions, for desktop icons,
and for help files. Refer to dtappgather(1) and
dtsearchpath(1) for more information.
DTSPSYSDATABASEHOSTS
Used by system administrators as an input to dtsearchpath to
create the DTDATABASESEARCHPATH environment variable. Refer
to dtsearchpath(1) for more information.
DTSPSYSHELP Used by system administrators as an input to dtsearchpath to
create the DTHELPSEARCHPATH environment variable. Refer to
dtsearchpath(1) for more information.
DTSPSYSICON Used by system administrators as an input to dtsearchpath to
create the XMICONSEARCHPATH and XMICONBMSEARCHPATH
environment varables. Refer to dtsearchpath(1) for more
information.
DTSPUSERAPPHOSTS
Used by end users as an input to dtsearchpath to create the
DTAPPSEARCHPATH environment variable. Refer to
dtappgather(1) and dtsearchpath(1) for more information.
DTSPUSERDATABASEHOSTS
Used by end users as an input to dtsearchpath to create the
DTDATABASESEARCHPATH environment variable. Refer to
dtsearchpath(1) for more information.
DTSPUSERHELP Used by end users as an input to dtsearchpath(1) to create
the DTHELPSEARCHPATH environment variable. Refer to
dtsearchpath for more information.
DTSPUSERICON Used by end users as an input to dtsearchpath(1) to create
the XMICONSEARCHPATH and XMICONBMSEARCHPATH environment
variables. Refer to dtsearchpath(1) for more information.
DTTAGOPT Used by dthelptag(1). Refer to dthelptag(1) for more
information.
DTUSERSESSION Used to control the location of the end user's subdirectory
where the Application Manager will be rooted. Also used by
the Help system to store data on a per user-session-display
basis. Refer to dtappgather(1) or dthelpview(1) for more
information.
EDITOR Is set to /usr/dt/bin/dtpad Refer to dtlogin(1) for more
information.
HOME Is set to the home directory of the user. Refer to
dtlogin(1) and dtmail(1) for more information.
KBD_LANG Is set to the value of LANG for applicable languages. Refer
to dtlogin(1) for more information.
LANG Is set to the current NLS language (if any). Refer to
dtlogin(1) for more information.
LC_ALL Is set to the current NLS language (if any). Refer to
dtlogin(1) for more information.
LC_MESSAGES Is set to the current NLS language (if any). Refer to
dtlogin(1) for more information.
LINES Set by the terminal emulator. Refer to dtterm(1) for more
information.
LOGNAME Is set to the user name. Refer to dtlogin(1) for more
information.
LPDEST Set the printer destination for the file. Refer to dtlp(1)
for more information.
MAIL Is set to /usr/mail/$USER (system dependent). Refer to
dtlogin(1) for more information.
MAILRC Used by dtmail(1) as the mailer's startup file. Refer to
dtmail(1) for more information.
MANPATH The dtsearchpath(1) utility appends /usr/dt/man to it.
Refer to dtsearchpath(1) for more information.
NLSPATH Determine the location of message catalogues for the
processing of LC_MESSAGES. Refer to dtterm(1) for more
information.
PATH Is set to the value of the userPath resource. Refer to
dtlogin(1) for more information.
SHELL Is set to the user's default shell (from /etc/passwd).
Refer to dtlogin(1) and dtterm(1) for more information.
TERM Is set to dtterm the default CDE terminal emulator. Refer
to dtterm(1) and dtlogin(1) for more information.
TERMINAL_EMULATOR
Set by the terminal emulator. Refer to dtterm(1)) for more
information.
TTPATH Used by ToolTalk. It tells ToolTalk where to find the
ToolTalk types database when in XDR mode. Refer to
ttsession(1) for more information.
TTSESSION_CMD This specifies the shell command to be used by all ToolTalk
clients for auto-starting ttsession. Refer to ttsession(1)
for more information.
TT_ARG_TRACE_WIDTH
Used by ToolTalk. It specifies the number of bytes of
argument and context values to write when in trace mode.
Refer to ttsession(1) for more information.
TT_FILE Set by ttsession when it invokes a tool to recieve a
message. Refer to ttsession(1) for more information.
TT_SESSION The ttsession utility uses this varible to communicate its
session ID to the tools that it starts. Refer to
ttsession(1) for more information.
TT_TOKEN Used to inform the ToolTalk client library that it has been
invoked by ttsession. Refer to ttsession(1) for more
information.
TT_TRACE_SCRIPT
If set, tells libtt to turn on client-side tracing as
specified in the trace script Refer to tttrace(1) for more
information.
TZ Is set to the value of the timeZone resource or system
default. Refer to dtlogin(1) for more information.
USER Is set to the user name. Refer to dtlogin(1) for more
information.
WINDOWID Set by the terminal emulator. Refer to dtterm(1) for more
information.
XAPPLRESDIR Specifies the name of a directory that contains application
specific resources. Refer to dtterm(1) and dtwm(1) for more
information.
XAUTHORITY May be set to an authority file. Refer to dtlogin(1) for
more information.
XENVIRONMENT Specifies the name of a resource file with user- or machine
specific resources. Refer to dtterm(1) and dtwm(1) for more
information.
XFILESEARCHPATH
Defines a language-dependent location of app-defaults.
Refer to dtterm(1) and dtwm(1) for more information.
XMICONSEARCHPATH
Used to locate desktop icons. Refer to dtsearchpath(1) for
more information.
XMICONBMSEARCHPATH
Used to locate bitmap (2 color) desktop icons. Refer to
dtsearchpath(1) for more information.
XMODIFIER Specifies which input method to use. Refer to dtterm(1) for
more information.
SEE ALSO
Commands: dtaction(1), dtappgather(1), dtappintegrate(1), dtcm(1),
dthelpgen(1), dthelptag(1), dthelpview(1), dtlogin(1), dtlp(1),
dtsearchpath(1), dtspcd(1m), dtstyle(1), dtterm(1), dtwm(1),
tt_type_comp(1), ttsession(1), tttrace(1)
Files: dtactionfile(4), dtdtsfile(4)
|
Index for
Section 5 |
|
|
Alphabetical
listing for D |
|
 |
Top of
page |
|