Footnotes

Note

Clicking on a [Return] link takes you to the first reference to the footnote you are returning from. If there are multiple references to that footnote, this might not be the place you came from.

1. Use a TruCluster Production Server Software configuration as an example, but remember, TruCluster MEMORY CHANNEL Software configurations do not use a shared SCSI bus. [Return]

2. You may add extra network adapters for redundancy with Available Server. [Return]

3. Used for both Available Server and Production Server [Return]

4. Used for Available Server only [Return]

5. The BC06P is no longer available for purchase. [Return]

6. The length of the differential UltraSCSI cables between the terminators. You do not need to compute the length of the single-ended bus segments in storage shelves, trilink connectors, or the SCSI adapters. [Return]

7. This is the only step required for hardware options with the TruCluster MEMORY CHANNEL Software product. [Return]

8. Skip this step for the TruCluster Available Server Software product. [Return]

9. If you install additional KZPSA SCSI adapters or an extra network adapter at this time, delay testing the MEMORY CHANNEL until you have installed all hardware. [Return]

10. For Production Server, a cluster member does not have to be a member of an ASE, but there must be at least one ASE in the cluster. [Return]

11. SBB tape drive SCSI ID is determined by the SBB physical slot. [Return]

12. SBB tape drive SCSI ID is determined by the SBB physical slot. [Return]